Transfer case oil BW44 Ravenol 1L
- Product Code: 1211147-001
- Volume: 1 L
Specification: Mopar 68089195AA
Oil type: Full synthetic
Recommendation: BorgWarner 44-40, BorgWarner 44-44, BorgWarner 44-45 bis 2016, BorgWarner 44-46, BorgWarner 44-47, BorgWarner 44-48, Chrysler 300C LX, Chrysler Verteilgetriebe 68214750AC, Chrysler Verteilgetriebe 68214751AB, Chrysler Verteilgetriebe 68214751AC für 300C LX, MB 236.13 (A 001 989 23 03), Mercedes A 001 989 22 03, Mercedes Verteilgetriebe A2032800700, Mercedes Verteilgetriebe A2112800900, Mercedes Verteilgetriebe A2112801000, Mercedes Verteilgetriebe A2202800700, Mopar 68049954AC / 68049954AA
RAVENOL Transfer Fluid BW 44 is a PAO (Poly-alpha-olefin) based, full synthetic transfer fluid with a special additive and inhibition, which ensure the proper functioning of the active transfer case.
RAVENOL Transfer Fluid BW 44 is a full synthetic gear lubricant for use in electronically controlled active transfer case.
RAVENOL Transfer Fluid BW 44 ensures optimum power transmission.
Application Note
RAVENOL Transfer Fluid BW 44 was developed for use in Borg-Warner transmission systems BW 44-40 and BW 44-44 from 2016.
RAVENOL Transfer Fluid BW 44 provides a stable viscosity even under the highest loads. It is particularly suitable when a specification according to MB 236.13 is required for Mercedes A001 989 23 03; Mercedes transfer case A2202800700, A2112801000, A2112800900, A2032800700, A2112801000, A2112800900, A2032800700 for 4Matik S-Klasse W220, E-Klasse W211, C-Klasse W203. Also suitable for Chrysler transfer case 68214750AC, 68214751AB, 68214751AC for Chrysler 300C LX, Dodge Charger LX/LD, Dodge Magnum LX.
Characteristics
- Very good lubricating ability even at very low temperatures in winter
- A high, stable viscosity index
- Very good oxidation stability
- Protection against wear, corrosion and foam formation
- Good balanced coefficient of friction
- Neutral towards sealing materials
- Neutral behavior by inhibition compared with non-ferrous metals
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 846,0 | EN ISO 12185 |
| Colour | gelb | DIN 51757 | |
| Viscosity at 100 °C | mm²/s | 7,2 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 37,2 | DIN 51562-1 |
| Viscosity Index VI | 162 | DIN ISO 2909 | |
| Brookfield Viscosity at -40 °C | mPa*s | 7900 | ASTM D2983 |
| Pourpoint | °C | -66 | DIN ISO 3016 |
| Seq. I at 24 °C | ml/ml | 0/0 | ASTM D892 |
| Seq. II at 93,5 °C | ml/ml | 0/0 | ASTM D892 |
| Seq. III at 24 °C after 93,5 °C | ml/ml | 0/0 | ASTM D892 |
| VKA Four Ball Test (Wear) | mm | 0,34 | DIN EN ISO 20623 |
| VKA Four Ball Test (EP Extreme Pressure) | N | 2200 / 2400 | DIN EN ISO 20623 |
| mm²/s | 35,84 | DIN EN ISO 20844 | |
| mm²/s | 6,619 | DIN EN ISO 20844 | |
| Copper Strip Test at 150 °C | 1a | ASTM D130 | |
| Flashpoint | °C | 240 | DIN EN ISO 2592 |
| Noack Volatility | % M/M | 6,9 | ASTM D5800 |
All indicated data are approximate values and are subject to the commercial fluctuations.
